知识产权

当前位置:首页 > 合同范本 > 知识产权

国际计算机软件许可合同格式(附英文)

导读:国际计算机软件许可合同格式(附英文)全文本合同是由以下双方于_____年_____月_____日签订的:中国_____是根据...

导读:国际计算机软件许可合同格式(附英文)全文本合同是由以下双方于_____年_____月_____日签订的:中国_____是根据中华人民共和国法律正式成立并注册的企业法人(简称“买方”);_____国_____公司(简称“卖方”)。鉴于卖方多年来从事

国际计算机软件许可合同格式(附英文)

  全文本合同是由以下双方于_____年_____月_____日签订的:中国_____是根据中华人民共和国法律正式成立并注册的企业法人(简称“买方”);_____国_____公司(简称“卖方”)。

  鉴于卖方多年来从事_____系统的设计、生产、销售业务并为该系统提供服务,并在进一步开发;

  鉴于买方愿意建立一个_____系统;

  鉴于引进_____系统将会提高科学技术水平,改进_____的质量和类型,在先进技术产品的使用及服务方面提供培训机会,并且通过创造一种平等、积极的工作环境促进工人的权利和尊严,从而对中国人民做出贡献;

  鉴于按照平等互利的原则,经友好协商,买方已决定它愿成为_____系统的使用人,而卖方愿意提供该等系统供买方使用。

  因此,考虑到本合同中所含的相互条款和协议,现双方特协议如下:

  1.1.双方间的协议(简称“合同”)由本合同所规定的条款和条件以及以下所提及的附件构成:

  附件一 系统组件附件二 交货和安装时间表附件三 价格和支付条件附件四 产品说明和规格附件五 卖方软件许可合同附件六 软件分许可合同附件七 租赁合同

  2.定义下列词语在本合同中应有如下含义:

  (a)商用_____系统:(略)

  (b)用户_____系统:(略)

  (c)控制用计算机:指由买方用于_____系统及其所控制的一切_____系统组成部分。

  (d)_____(注册商标):指卖方的一个注册商标,卖方用其表示生产和销售的_____系统的一个较早版本。

  (e)_____(注册商标)Ⅱ:指_____系统的一个较晚版本,卖方用该词指作为本合同标的的系统。

  (f)系统:指卖方的_____系统。(略)

  (g)标准转换器:(略)

  3.系统的提供(a)卖方根据作为本合同一部分的产品说明和规格及交货和安装时间表提供系统,买方根据作为本合同一部分的价格和支付条件就系统付款。

  (b)在买方订购的_____系统可以提供使用之前,卖方应根据本合同附件七租赁合同所规定的条款将此系统租赁给买方。买方承认并同意,卖方可以自行决定,通过改进租赁给买方的_____系统、提供一个不同的系统或者将前述两个系统结合起来,提供买方所订购的_____系统。

  4.交货和安装(a)系统按附件二规定的交货时间表交付。运费将加在卖方发票上,由买方支付。买方有权指定承运人,并以书面形式将其所选择的承运人通知卖方。如果买方未将其所选择的承运人通知卖方,卖方将挑选承运人。但是,卖方不应因此承担有关运输的任何责任,并且也不应将承运人视为卖方的代理人。除非买方要求,卖方没有义务为买方取得保险。

  (b)卖方或其指定的服务供应商应在买方指定的中华人民共和国境内设施上安装_____系统。安装费应加在卖方发票上,由买方支付。买方应根据本合同的安装时间表,按照预先交给买方的场地准备指南所规定的规格,负责按时完成任何必要的现场准备及买方设施的修改。必要时,买方应按照场地准备指南提供其他测试设备及物资(包括但不限于占地面积、电源插座、中继电缆、卫星设施等)。买方应负责一切该等设施、准备、设备、物资以及为此所需的许可和批准,并支付其费用。

  5.遵守卖方所在国出口管制法律(a)卖方同意为买方从卖方购买的产品和技术,申请_____向中国出口产品和技术所必需的一切_____政府出口许可、同意和批准。如果卖方虽尽其最大努力仍不能取得该等产品和技术从_____合法出口中国所需的任何及一切许可、同意和批准,则本合同立即终止,卖方免除履行,并且买方使卖方不受损害。

  (b)买方特承诺遵守_____出口法律及法规,并且同意,在未取得必要的_____政府批准许可的情况下,买方不会故意:

  (i)直接或间接地向在出口时_____政府或其任何机构要求出口许可或其他政府批准的任何国家出口从卖方获得的、源于_____的技术资料、软件或该技术资料的任何直接产品;

  (ii)向_____政府或其任何机构要求出口许可或其他政府批准的任何国家国民透露从卖方获得的、源于_____的任何技术资料或软件。

  6.所有权和损失风险本合同项下购买的一切物品的所有权及损失风险,应在卖方设施所在地,于该等物品交付承运人后转移给买方。在购买价款全部支付前,买方授予卖方对该系统的担保权益,作为买方按照本合同付款的保证。在交付承运人后,系统或其任何部分的损失或损坏应由买方负责。在损失风险转给买方后,卖方应有权得到所损失或损坏的任何物品的全部购买价款。

  7.验收测试和验收(a)系统的验收测试应依照卖方的验收测试程序进行。卖方和其指定的服务供应商应根据前述测试程序进行验收测试。如果任何该等测试没有成功完成,卖方或其指定的服务供应商应对测试进行评估,并且对系统进行任何调整或校正,使系统能按规格运行。一切该等测试的开始,应给予买方合理的事先通知,并且给予买方观察一切该等测试的合理机会。

  (b)“成功完成”一词,在本合同中用于任何测试方面时,指在特定的测试程序中规定的该等测试的成功完成,并且一切对测试的提及指的都是卖方验收测试程序中的测试。

  (c)为附件三之目的,在系统的验收测试程序中规定的一切测试已在买方设施地点成功完成时,系统的验收(简称“验收”)应被视为已经进行。

  (d)卖方声明并保证,卖方将向买方交付完整、准确、有效的系统。该系统能够达到在产品说明和规格中规定的技术指标,并由系统验收测试的成功完成予以证明。成功完成应被视为系统完整、准确、有效并能达到规格所述技术指标的决定性证据。

  8.装运到场和验收合格(a)如果系统或其任何部分已按附件二规定的日期准备装运或安装,但根据买方请求或者由于买方不能提供验收或安装系统所必需的设施、测试设备或物资而使该等装运或安装延迟超过_____个日历日,则卖方可以根据其选择通知买方,系统或其任何部分作为已事实上装运、交付并安装(简称“装运到场”)对待。此外,对于该等延迟所导致的一切储存费或其他费用,买方应补偿卖方。[page]

  (b)通知装运到场后_____天,卖方有权按本合同附件三规定的交付条件就下列款项向买方开出发票:

  (i)装运到场的商用_____系统百分之百(100%)的购买价款:及(ii)就_____系统而言,为该系统已实际装运情况下的到期金额,余额在验收后开出发票。

  (c)在附件二规定的装运或安装日期前后的任何时候,有以下任一情形的,买方即对系统或其任何部分进行了合格验收(简称“合格验收”):

  (i)买方决定并书面通知卖方,系统适宜开始买方拟用系统进行的操作;

  (ii)系统已经开始买方拟用系统进行的操作。

  (d)合格验收应具有与上述第8(b)条相同的结果,但_____系统的到期金额应为迄今已付金额与百分之九十(90%)的验收后到期金额的差额,余额在验收后开发票。

  (e)装运到场和合格验收都不免除卖方在本合同项下的任何责任,包括验收测试的成功完成以及按本合同条款和条件对瑕疵或缺陷进行纠正。

  9.税收销售设备和在中国提供修理及安装服务的价款不包括一切派款、关税、销售税、使用税、国内消费税、增值税及类似税收(含买方政府从原扣缴的金额),买方应承担并支付上述税款。任何要求卖方就销售、交付或使用系统所收、缴的税款(卖方的所得税除外)应由买方支付,并且该等税款应在系统交付后到期应付。买方同意就因买方过失的行为与不行为或者因买方违反或不履行本第九条而导致的一切请求补偿卖方,使卖方不受损害并为其辩护。

  10.付款(a)作为卖方按本合同提供本合同系统及一切有关物品的全部对价,买方应支付卖方在附件三中规定的系统购买价款。

  (b)付款应按附件三进行。

  (c)如果在发票金额或其任何部分到期时买方没有付款,买方特同意就一切该等金额按年利率百分之十八(18%)或法律允许的最高利率向卖方支付从到期应付日期至付款日期的利息。

  11.操作手册和其他资料/培训(a)卖方应在提供每个商用______系统时随附一份用户指南。

  (b)卖方应向买方提供3份_____系统所有操作手册和安装指南。

  (c)系统安装以后,卖方或其指定的服务供应商应在系统使用和操作期间给买方雇员提供为期_____日的培训课程。

  12.系统保证(a)卖方声明并保证,卖方是本合同中向买方许可、租赁或销售的一切知识产权的所有人或受益被许可人,并且卖方有权向买方许可、租赁或销售前述知识产权。卖方保证本合同项下提供的系统和一切设备及有关软件(除控制用计算机及控制用计算机操作系统软件)自验收日期后的一年内没有品质及工艺方面的瑕疵,但商用及用户_____系统除外,两者的保证期应自装运日期后为期一年。卖方在该期间内应免费在买方场地修理、更换并重新安装_____系统或其任何有瑕疵的部分。卖方保证不包括控制用计算机或系统中包含的控制用计算机操作系统软件,但卖方应(在可转让的范围内)向买方转让任何著名生产厂商对控制用计算机或系统中包含的控制用计算机操作系统软件的保证。如果不存在验收日期后为期一年的该等转让保证,卖方应为买方利益并作为购买价款的一部分,为该等控制用计算机及操作系统软件购买硬件和软件维修续期合同,以取代保证,该维修续期合同应自验收日期后为期一年。如果由于保证范围外的瑕疵或正常使用和常规安装外的原因导致修理和更换,买方应对卖方为纠正该等瑕疵所提供的一切劳务和物资(包括差旅费)向卖方付款。

  (b)本合同规定的保证仅适用于常规安装、正常使用并在保证期间内发现瑕疵的物品。该等保证不应适用于未经卖方书面同意而修改、改动或者被滥用、发生事故、过失或不当使用的物品。

  (c)本合同规定的保证取代对系统性能的一切其他明示或默示保证,包括但不限于关于适销性或适合某一特殊用途的任何默示保证。买方就卖方违反本合同规定的任何保证享有的唯一救济应是卖方为履行该等保证而进行的修理和(或)更换。卖方在任何时候都不对视听或数据信号的任何损失、业务中断或者任何种类或性质的特殊、间接或结果性损害负责。卖方不对买方过失或过错所导致的履行本条项下义务的延迟负责。

  13.非保修性修理及备件支持(a)在(i)系统验收满_____年之日,或(ii)买方停止系统操作之日(依较早者)前,卖方应提供系统的修理服务和/或备件(简称“支持期”)。双方理解,对不在保证范围内的备件及修理,卖方应按其当时的原料价或备件价格收费,并在工作完成后尽快开出发票。卖方在本合同或其他合同项下,没有义务向未就任何该等备件或修理及时付款的任何人进一步提供备件或修理服务。

  (b)在支持期之后,卖方提前6个月书面通知买方其要中止提供系统的备件或修理服务的,可以中止提供。但是,卖方可以选择以下其中一项:

  (i)授予买方为自用而非出售之目的而制造任何该等系统组件(不包括控制用计算机或其操作系统软件)的非排他性许可,并向买方提供一切必需的文件、规格、图纸及其他资料;

  (ii)允许买方有机会购买其认为是系统维修和支持所需的足量备件。

  (c)为本合同之目的,如果在_____系统装运后的任何_____个月内,买方没有在正常使用的仪器上使用卖方提供的系统,作为其正常使用的一部分,编译或拆译信号码,共计至少为_____小时,或者在该等装运后连续_____个月内,买方在每_____个月内没有在正常使用的仪器上使用卖方提供的系统,作为其正常使用的一部分,编译或拆译信号码,共计至少为_____小时,则买方应视为“停止系统操作”。

  14.维修续期在本合同规定的_____系统的保证期届满前,卖方和/或其指定的服务供应商应给买方提供机会,签订一份_____系统(包括有关控制用计算机的软件,但不包括控制用计算机的硬件平台)的维修续期合同,并可连续续展一年。

  15.系统许可

  (a)控制用计算机的操作系统软件按本合同附件五规定的操作系统许可人进行分许可的条件和条款向买方提供。

  (b)系统操作所需的一切卖方软件按本合同附件四规定的许可向买方提供。

  (c)本合同未在涉及卖方所有的任何产品、系统或者卖方拥有的或由卖方分许可的任何所有权方面给予技术转让或转移。在本合同项下,也未给予授予分许可的权利,亦不能从中推断出或暗示有分许可权。[page]

  16._____系统的安全要求双方同意制定_____系统的安全计划,为防止系统在装运、储存、操作或双方进行与本合同有关的其他活动期间(包括保证期和保证期后)被盗窃或有其他泄露,该计划规定将要建立并保持的安全程序。目前的_____系统安全要求以前已提供给买方。买方同意采用和遵守并(或)促使其代理人采用和遵守卖方不时建议的替代和补充安全要求。

  17.设备提前订购的时间作为本合同标的设备,交付日期在附件二中规定。其他设备的提前订购时间如下:

  (略)

  买方将对希望交付的设备提供为期_____个月的使用。使用的头_____个月被视为确定订货,如取消订单,则要受附件三规定的取消订货惩罚。

  18.相互声明各方声明并保证:

  (a)它是在其州内或国内正式成立和注册的,符合各项规定,它有权力和授权签订并履行本合同及由其签署并递交的、与之有关的任何其他协议和文件(在本合同中,统称“文件”)。

  (b)其签署、递交和履行文件已经通过一切必要的行为获得正式授权。

  19.保密(a)买方同意使用至少与买方适用于自身专有资料相同的谨慎与防范措施,对卖方向买方透露的、包含专有资料并标明“专有”或“保密”的任何资料或数据,如卖方的图纸和软件(包括但不限于设计、报告、软件文件、手册、模型等等)予以保密,但无论如何,谨慎不得低于合理程度。未经卖方书面允许,不得复制、向他人透露或者使用该等资料或数据。这些义务不适用于下述任何资料或数据:在未违反本条的情况下属于或成为公共资料的资料或数据;买方合法地从第三方获得的资料或数据;买方独立开发并且未从卖方资料或数据中获益的资料或数据。卖方没有义务提供保密或专有资料;

  (b)买方在本条项下的义务应在本合同终止或届满后继续有效。由卖方提供给买方的一切有形专有资料属于并保持为卖方的财产,并应在卖方请求时退还给卖方;

  (c)除在本合同中有明确规定,双方同意,卖方对保密或专有资料的透露并不意味向买方授予卖方任何专利、商业秘密或版权的许可;

  (d)任何一方未经另一方每次书面明示同意(该等同意不得被无理拒绝或拖延),不得在推售、广告、公关活动中或以任何其他形式,使用另一方、其母公司、子公司、其他关联公司的名称或者任何商标或商号(或象征)。

  20.补偿

  (a)每方应就其按本合同规定履行其本合同项下义务所导致的、与其有关的或由其引发的一切损失、损害、责任、支出、费用、索赔、诉讼、要求、诉讼行为、诉因、程序、判决、估定税额、欠额以及收费(合称“损害”)补偿另一方、另一方的股东、董事、管理人员、雇员、代理人、被指定人、受让人或其中任何一人,使之不受损害,并且在不对上文所述予以限制的条件下,买方还应就下述各项所导致的、与其有关的或由其引发的上述任何事项补偿卖方:(略)。

  (b)如果第三方提出一方按本合同规定有权获得补偿的索赔请求,一方(“受补偿方”)应在实际可能的情况下尽早通知另一方(“补偿方”),但无论如何不得迟于在收到该等请求后的第_____日。受补偿方未给予该通知并不排除其按本合同规定寻求补偿,除非未给予该通知使补偿方抗辩该索赔请求的能力受到实质影响。补偿方(与其自行选择的律师一起)应及时对该索赔请求进行抗辩,而受补偿方应在对该索赔请求进行抗辩时与补偿方合作,包括按照补偿方规定的原则就该事项达成和解(补偿方承担该和解的一切费用与支出)。如果补偿方收到索赔通知后未为受补偿方辩护,则受补偿方应有权对该索赔进行抗辩、妥协或和解,费用由补偿方承担。在承担对该等索赔请求的辩护后,补偿方可进行和解、妥协或抗辩,由其酌处。无论本条有何相反的规定,如果发生对买方的诉讼、索赔、诉讼行为或程序是基于以下主张,即卖方制造并销售给买方的物品侵犯了任何第三方的_____国专利、版权、掩模、商标、商业秘密或其他任何知识产权,则卖方将就该诉讼、索赔、诉讼行为或程序为买方辩护,并将支付终局判决(不能再上诉的)判定由买方承担的损害赔偿与费用,以及买方实际的支出与费用,上述规定的条件是:

  (1)卖方被及时告知侵权指控的发生,并得到与该侵权指控有关的每一通讯、通知或其他诉讼文书的副本,    

  (2)得到该辩护的独家控制权(包括选择律师的权利),以及就该诉讼或程序进行妥协或者和解的独家权利;但是,卖方在本合同项下的责任(如果有的话),应严格地并且仅仅限于卖方因买方销售侵权物品而应从买方获得的特许权使用费收入金额。如果侵权是由卖方交货后有人将物品混合、添加或改造而引起,或者由实施某一方法时使用物品(或其任何部分)而引起,则卖方无义务进行辩护,亦无承担费用或损害赔偿的责任。

  如果卖方制造并向买方提供的任何物品被判定侵犯有效的_____国专利,且卖方被禁止使用该专利,或者如果卖方相信很可能发生侵权,卖方将尽一切合理的努力,自费从以下措施中作出选择:(1)为买方取得使用该等物品而不产生侵权责任的权利,或(2)以在其他方面实质上符合本合同所有规定的非侵权替代品来代替或改造该等物品,或(3)在该等物品被返还后,退还该等物品的购买价以及运费(扣除向买方交货至退还期间使用该等物品并从中获得利益的折扣金额,该折扣金额按从卖方装运之日起_____年直线式折旧来计算)。如果交货完成前发生侵权指控,卖方有权拒绝进一步装运,而不构成违约。如果卖方还没有被禁止向买方销售该等物品,应买方请求,卖方可以(仅由卖方酌定)向买方供应该等物品,在此情况下,买方应被视为向卖方做出与本合同上文所述相同的专利补偿保证。

  如果有人指称卖方按照买方规格制造的物品侵犯了有效的_____国专利,并以此为根据向卖方提起诉讼或程序,则买方应被视为已向卖方做出同样的专利补偿保证。

  买方应将第三方侵犯本合同项下许可给买方的知识产权及时通知卖方。如果第三方侵犯该等知识产权,双方应互相合作,采取适当的行动制止该侵权行为。

  上文规定了本合同双方就专利、版权、掩模、商业秘密、商标以及其他专有权利的侵权(无论是直接的还是协从的)所承担的唯一责任,并且取代就其所做出的所有保证(明示的、暗示的或法定的),包括(但不限于)_____中规定的不侵权保证。[page]

  21.责任的限度买方同意,如果买方就所交付的任何系统或系统组件提出任何一种索赔,或就未能交付该等系统或系统组件提出索赔(无论是何种行为方式),卖方在任何情况下均不承担金额超过对其提出该等索赔的系统或系统组件购买价的损害赔偿。

  在任何情况下,卖方均不就利润损失、失去用途、业务中断、或者任何种类的间接、特殊或结果性的损失承担赔偿责任。

  22.不可抗力“不可抗力”指自然现象、火灾、意外事故、水灾、地震、罢工或工厂关闭、骚乱、暴动或动乱、禁运、战争,任何将来的法律、命令、法规或其他政府行为,运输迟延、能源短缺、原料短缺或在卖方合理控制之外的卖方供应商延迟交货。如果不可抗力的原因阻止、限制、延迟或干扰卖方履行本合同,则应免除卖方对不可抗力所延迟或阻止的部分的履行,但是,卖方应采取合理的措施避免或消除该等造成不履行的原因,并且一旦该等原因被消除,则卖方应继续履行原受被消除原因影响的条款。

  23.终止(a)如果发生下列情况,买方或卖方应有权终止本合同:另一方为债权人利益转让其权利,或者一位管理人、破产托管人或类似官员被指定管理该方的全部或任何部分财产或业务,或者该方被宣告破产。

  (b)如果买方疏忽或不按照本合同的条款付款,而且该情形在书面通知买方后_____个工作日内未获补救,卖方应有权终止本合同。卖方可以(由其酌定)将买方补救的时间期限延长。

  24.不放弃权利本合同一方免予追究对本合同任何条款的违反或不履行、或一方一次或多次未执行本合同的任何条款或行使本合同项下的任何权利或特权,均不得被解释为对任何随后的违反或不履行不予追究、或对本合同项下任何该等条款、权利或特权的放弃。

  25.通知一方按照本合同可能向另一方发出的所有通知、请求或其他通讯应以书面做出,各方通讯地址如下:

  (略)

  本合同期间,双方的一切通讯均应以英文进行。

  26.适用法律以及争议解决除关于法律选择或律师费的支付外,本合同应适用_____法律,并按照_____法律解释。

  (a)协商。如果发生与本合同或其任何附件的效力、解释或执行有关的争议,双方首先应争取通过友好协商解决该争议,如果一方向另一方发出通知开始协商之后的_____日内,该争议未以此方式解决,则任何一方可按照本第二十六条的规定将该争议提交仲裁。

  (b)仲裁。仲裁应在_____国际仲裁中心进行,仲裁应按照1976年12月5日通过的《联合国国际贸易法委员会仲裁规则》(UNCITRAL)进行。该规则通过在此款中提及而被视为本合同的一部分。

  (c)仲裁程序在仲裁过程中,应适用下列具体规定:

  1.该仲裁的一切程序均应以英文进行;

  2.仲裁员为三名,均应英文流利。买方和卖方各自指定一名仲裁员。第三名仲裁员由_____国际仲裁中心主席指定,并担任仲裁庭的首席仲裁员;

  3.仲裁费用(包括律师费以及双方的费用)应由败诉方承担;

  4.当发生任何争议时以及对任何争议进行仲裁时,除争议事项外,双方将继续行使本合同项下各自其余的权利,履行本合同项下各自其余的义务;以及5.仲裁裁决应是终局的,对双方均有约束力,双方同意受其约束,并采取一切必要的措施执行仲裁裁决。任何有管辖权的法院均可就仲裁的裁决做出判决,或者可向该法院申请仲裁裁决的司法承认并发出执行令(视情况而定)。如果就仲裁裁决或就该裁决做出的判决向法院请求司法承认并发出执行令,双方明示地放弃反对的权利,包括该方否则具有的以主权国豁免权为理由的任何抗辩。

  27.拘束力该等条款和条件对本合同双方、其继受人以及允许的受让人均有约束力,且为其利益而订立。

  28.整个合同本合同所含的条款与条件包括双方应本合同标的达成的全部协议与共识,并且合并与取代之前所有的协议、共识以及声明。任何增加或修改除非以书面做出并由本合同双方签字,均属无效。本合同以英文订立,正本一式四份,每方各执两份。

  29.合同期限届满本合同于生效日起_____年期满。

  双方于首页载明的日期正式签署本合同,以资证明。

  卖方 买方签字:_____ 签字:_____姓名:_____ 姓名:_____职务:_____ 职务:_____日期:_____ 日期:_____

  附件附件一 系统组件(略)

  附件二 交货和安装时间表(略)

  附件三 价格和支付条件(略)

  附件四 产品说明和规格(略)

  附件五 卖方软件许可合同本附件五(“许可合同”)条款规定,在以下指明的若干计算机软件用作卖方按合同(本附件五构成其一部分)所供系统的一部分或者与之一起使用的情况下,卖方即将该系统许可给买方。

  1.许可的授予卖方(下称“许可人”)特此按本附件条款和条件向买方(下称“被许可人”)授予使用和复制本许可合同第10条所列及产品规格所述软件程序的不可转让的非独家许可,而被许可人特此按本附件条款和条件接受该许可。本许可合同第10条所列的、构成_____控制系统的程序,与其任何拷贝、复制件或摘录一起,在本附件中统称为“程序”。除本附件具体规定的以外,未授予任何许可,无论是明示的还是默示的。

  2.使用限制被许可人只可将程序用于卖方按本合同条款提供作为每个系统一部分的计算机,例外的是,如果_____系统计算机因为发生故障不能操作,或在进行保养性维修、工程设计变更、特制件或模型变换期间不能操作,则亦可将程序用在被许可人的备用计算机上,直到_____系统控制用计算机修复到操作状态为止。被许可人只能将程序用于直接的内部操作方面,在任何情况下均不得将程序供给他人使用。

  事先未经卖方以书面形式同意,不得在_____系统控制用计算机硬件上安装、操作或配置任何其他程序。这也包括可能由卖方提供的、不在本许可合同范围内的操作软件或应用软件。

  3.复制限制被许可人不得复制程序或其任何部分,例外的是,被许可人只是为了备份、存档和将程序置于适宜执行形式的,可以复制程序。所有经允许的复制件,都要清楚地标上与原先供给被许可人之程序相同的、关于许可人所有权和版权的限制说明。经允许的复制件应以安全的方式予以保存。[page]

  4.转让限制除非本合同允许并经卖方事先以书面形式同意,被许可人不得出售、转让、许可、转移或以其他方式提供程序。

  5.所有权程序产权属于许可人,程序或其任何部分的产权、所有权或技术并未因此转给被许可人。被许可人承认,程序构成许可人的保密、专有资料和商业秘密,而不论程序或其他任何部分是否已获得或者可能获得版权和(或)专利,程序乃是基于本合同项下被许可人与许可人之间的保密关系而向被许可人透露的。

  6.透露限制除非本附件明确允许,被许可人不得将程序或其任何部分透露或者以其他方式提供给第三方和被许可人没有必要授权其在业务中使用程序的任何雇员。被许可人应采取一切合理、必要的步骤,保证许可人(或其雇员)不将程序或其任何部分透露或者以其他方式提供给任何第三方。

  7.保证许可人保证其有权授予在本许可合同中所授予的许可,而且在验收之日起__年的期间内(在此称为“保证期”),程序基本上能按规格所述的方式运行。许可人在该保证项下的唯一义务是更正或替换已发现不合正常用途的任何程序。本保证明确替代一切其他明示或默示保证,包括(但不限于)关于适销性和适合某一特定用途的默示保证。许可人不保证程序和(或)其相关文件(如有的话)符合被许可人的要求,没有错误,或者能够不间断地操作,其质量和性能方面的全部风险由被许可人承担。无论如何,许可人不负责赔偿特殊、杂项或结果性的损失(包括但不限于营业利润损失、业务中断、业务资料丢失或其他金钱损失),即使已通知许可人有可能发生该等损失的,也是如此。

  8.专利和版权补偿保证对于向被许可人提起的诉讼,许可人同意自行承担费用为被许可人辩护,对于有管辖权法院在上述任何诉讼的终局判决中判由被许可人承担的损害赔偿和费用,许可人将对被许可人作出补偿,使之免受损害,其范围是判决基于这一主张,即在本许可合同所授予的许可范围内使用程序构

  成对_____国任何专利或版权的侵权。适用上述规定的条件是,被许可人已用书面形式及时将该项诉讼的主张和提起通知许可人,并允许许可人通过其律师对诉讼进行辩护,给予许可人可以合理得到的一切资料、协助和授权,以便使许可人能够进行辩护,另一个条件是,许可人在本许可合同项下的责任(如果有的话)应严格地并且仅仅限于许可人因被许可人销售侵权产品而从被许可人处得到的特许权使用费收入金额,许可人有权控制上述任何诉讼(包括上诉)的辩护及其一切谈判,其中包括达成任何和解或妥协的权利。如在任何诉讼中程序被判为构成侵权,程序的使用被禁止,许可人可以自行承担费用选择承担以下任何一项:(a)设法为被许可人取得继续使用程序的权利;(b)替换或修改程序,使之不再构成侵权,并在实质上用同样的质量进行同样的服务;(c)在程序退还许可人之后给予被许可人抵免,但要从中扣除使用、损坏和陈旧的折旧费。许可人对基于以下其中一项的任何版权或专利侵权所提出的请求不负责任:(1)所用的不是当时未经变动的程序释放;(2)被许可人停止操作系统;(3)被许可人未按附件三支付任何许可费或者未能遵守本许可证合同的条款和规定,而且在书面通知其纠正后持续达到_____天。

  本合同按以上(a)项或(b)项终止之后,被许可人应迅速将程序及其一切复制件还给许可人,并在终止后_____个月内向许可人提交一份书面声明,证明从许可人那里收到的程序和任何有关材料的原件或者就该许可所制作的复制件、摘录(包括部分复制和摘录)均已还给许可人或者销毁。

  9.所许可的程序按本许可合同许可的程序如下:

  (略)。

  10.配置和安装(略)。

  程序安装日期:__________安装者签字:__________被许可人签字:__________本许可合同与合同条款有矛盾的,以本许可合同为准。

  附件六 最终用户软件分许可合同卖方与“用户”已签订一份由用户从卖方购买某些设备和软件的合同(“销售合同”)。整个软件及其任何部分均受数字设备公司(“设备公司”)向卖方授予的许可约束。

  按照设备公司和卖方签订的原设备制造商(“制造商”)合同,卖方被授权批准设备公司软件程序(“软件”)最终用户分许可合同。因此,卖方同意按照下列条款和条件向客户授予分许可,而用户同意按照下列条款和条件接受该项分许可:

  1.标准许可条款

  A.软件许可的授予一旦用户订单已全部付款,卖方即应视为已向用户授予以下规定的软件许可。对用户的许可持续到按本合同规定终止之时为止。卖方向用户授予的许可以及用户在本合同项下的义务受本条款和条件支配。除本合同规定的以外,卖方未授予任何软件许可,不论是明示的还是默示的。

  B.软件执行(1)本软件许可合同附录一列明了软件本身以及可以在上面执行软件的处理机或配置设备。“经许可的处理机”一词是指许可中具体规定的、具有以下任一情形的处理机或配置设备:

  i.其序号在卖方提供的卖方许可证或软件许可订单确认书上已有具体规定的;

  ii.如果没有这种具体规定,软件按照许可首次在其上面执行的。

  (2)用户可以在经许可的处理机上执行软件,而且只有在经许可的处理机上执行软件所需的范围内,可以装入、复制或传送软件,但有以下两种例外:

  i.在因发生故障而无法在经许可的处理机上执行软件期间,用户可以暂时在另一单个处理机或配置设备上执行软件(诊断软件除外),并在暂时执行所需的范围内装入、传送或者复制软件;

  ii.用户可以按照_____国版权法的规定制作软件存档复制件。

  C.修改与合并用户可以:(i)修改软件(只能用机读形式),或者(ii)将已修改或未修改的软件并入其他软件,以便形成只是为了在经许可的处理机上执行软件所要的适配件。上述适配件中所含的软件任何部分继续受本条款和条件约束。

  D.软件的使用1.在按本合同执行分许可所需的范围内,用户可以将软件提供给其雇员和代理人使用。除本D款所指明的以外,用户不得以任何形式将软件提供给任何一方使用。

  2.软件含有任何保密或商业秘密资料的范围内的,软件及其所含的资料即按保密关系许可给用户。用户明确承认这种保密关系的存在,并同意按本合同规定对软件和资料予以保密。[page]

  E.个人和非排他性的许可用户的分许可是给用户个人的和非排他性质的,未经设备公司明示同意,不得转让。

  F.记录1.用户应做出完整、准确的记录,(i)用以辨认软件和经许可的处理机;(ii)标明软件位置。如卖方要求,用户应向卖方提供有关的记录,如卖方有理由认为,软件已在许可期间提供给任何第三方或者在任何其他处理机或配置设备上执行(本条款和条件许可的除外),用户应向许可人解释说明。

  2.用户同意在软件的所有完整或部分复制件、适配件或传送件上复制设备公司的版权通知及其他所有法律通知,包括(但不限于)其他所有权通知和政府机构要求进行的通知。

  G.许可限制;反向设计卖方未向用户或任何第三方转让任何软件的产权或所有权。除本条款和条件明确规定的以外,用户不得执行、使用、复制或修改软件,或者采取与设备公司对软件的知识产权不符的行动。用户不得以反向设计软件或者反向设计软件的任何硬件、固件执行为目的,拆编、反装、分析或以其他方式研究软件。

  2.许可终止A.如果用户疏忽或者未能履行、遵守其在本条款和条件项下对设备公司或卖方承担的任何义务,而且这种情况在书面通知用户后30日内未得到纠正,则卖方或设备公司可以终止在本合同项下所授予的任何许可和已发出的任何软件订单。

  B.终止,不论是卖方、设备公司终止的还是用户终止的,都适用于许可在经许可的处理机上执行的所有软件版本。

  C.在用户所作的任何终止生效之前,卖方或者设备公司作出任何终止的,用户应(i)交还卖方或者设备公司提供的任何许可证;(ii)销毁用户所掌握的各种软件版本的所有复制件;(iii)从用户所制的任何适配件中消除软件的各个版本的所有部分,并予以销毁;(iv)用书面形式证明所有复制件(包括用户适配件中所含的一切复制件)已经销毁。

  卖方:      买方:

  签署:_____ 签署:_____

  姓名:_____ 姓名:_____

  职务:_____ 职务:_____

  (本附件的附录略)。

  附件七 租赁合同(略)。

  6. COMPUTER SOFTWARE LICENSING AGREEMENT

  Whole Doc.

  This contract made as of this ___________ day, by and between ___________,a Chinese enterprise legal person duly organized and registered under the laws of the People“s Republic of China on behalf of __________, a Chinese entity duly organized and registered under the laws of the People”s Republic of China (both of the foregoing parties are hereinafter collectively referred to as “Buyer”) and ______________, a corporation organized and existing under the laws of ___________(“Seller”) as follows:

  1.The agreement between the parties (“Contract”) consists of the terms and conditions set forth herein and the following schedules incorporated by reference:

  Annex A System Components Annex B Delivery and Installation Timetable Annex C Price and Payment Terms Annex D Product Description and Specifications Annex E Seller“s Software License Agreement Annex F End-user Software sublicense Agreement

  2. Definitions

  The following terms shall have the following meanings in this Contract:

  (a) Commercial ___________system. (sketch)

  (b) Consumer _____________system. (sketch)

  (c) Control Computer: A component of the __________ System used by Buyer for __________.(d) System

  3. Provision of The System

  Seller shall provide the System in accordance with the Product Description and Specifications (Annex D) and Delivery and Installation Timetable (Annex B) incorporated herein and Buyer shall pay for the System in accordance with the Price and Payment Terms (Annex C) incorporated herein. In addition, Seller will provide the _________ System to the Buyer in accordance with Annex C. For the avoidance of doubt, the term “System”as used in this Contract shall solely refer to the Seller“s __________ system.

  4. Payment

  (a) In full consideration for providing the System and all related items to be provided under this Contract, Buyer shall pay to Seller the amount set forth in Annex C as the purchase price for the System.(b) Payments shall be made in accordance with Annex C.

  5. Delivery and Installation

  (a) Delivery of the System will be made in accordance with the delivery schedule set forth in Annex B. Shipping charges are specified in Annex C. Buyer shall have the right to specify the carrier and shall instruct Seller of its choice in writing. In the absence of such instructions, Seller will select the carrier, but shall not thereby assume any liability in connection with shipment, nor shall the carrier be considered the agent of Seller. Unless requested by Buyer, Seller shall have no obligation to obtain insurance for Buyer or assist the Buyer with any shipping claims.(b) The Seller shall, immediately upon the completion of the loading of the goods, advise the Buyer by cable/telex of the loading of the goods,the contract number, commodity, quantity, invoiced value and gross weight.(c) Seller or its designated service provider shall install the _________ System at Buyer“s designated facility in the People”s Republic of China. Installation charges are specified in Annex C. Buyer shall be responsible for timely completion, in accordance with the Installation Timetable herein (Annex B), of any necessary on-site preparations and modifications of Buyer“s facilities based on the specifications set forth in the Site Preparation Guidelines previously provided to Buyer. Buyer shall provide additional test equipment and resources (including but not limited to floor space, power outlets, interconnecting cables, racks,satellite facilities and the like), if needed, in accordance with the Site Preparation guidelines. Buyer shall have the responsibility for and shall pay for all such facilities, preparations, equipment, resources, licenses and permits required thereof.[page]

  6. Compliance with Export Control Laws of the Seller“s Country

  (a) Seller agrees to apply for all _____________ Government export licenses, permits and approvals required for the exportation from ___________ to China of the products and technology to be purchased by Buyer from Seller. In the event that, despite Seller“ s best efforts,Seller is unable to obtain any and all license, permits and approvals needed to lawfully export such products and technology from __________ to China, this Contract is immediately terminated, the Seller and Buyer are excused from performance, and each Party agrees to hold the other Party harmless.(b) Buyer hereby undertakes to comply with the export laws and regulations of __________ and agrees that, without obtaining the necessary license of approval from the Government, Buyer will not knowingly (i)

  export, directly or indirectly, any origin technical data or software acquired from Seller, or any direct product of that technical data, to any country for which the Government or any agency thereof at the time of export requires an export license or other governmental approval; or (ii)

  disclose any origin technical data or software acquired from Seller to any national of any country for which the Government or any agency thereof requires an export license or other governmental approval.(c) Within __________months of the signing of this contract, the Seller agrees to inform the Buyer of the status of the Seller“s application for the Government export licenses, permits and approvals required for the exportation from __________to China of the products and technology to be purchased by Buyer from Seller.

  7. Title and Risk of Loss

  The items purchased by the Buyer shall be delivered C.I.F. _________ in accordance with INCOTERMS 1990. Therefore, the risk of loss for the items purchased by the Buyer shall be borne by the Seller until the items are delivered to the export carrier. After delivery of the items purchased by the Buyer to the export carrier, the title and risk of loss for the items purchased by the Buyer shall pass to the Buyer.

  8. Acceptance Tests and Acceptance

  (a) Acceptance testing of the System shall be in accordance with Seller“s Acceptance Test Procedure. Seller or its designated service provider shall conduct the acceptance tests in accordance with said Test Procedure. If any such test is not Successfully Completed (as defined below), Seller or its designated service provider shall evaluate the test and make any adjustments or corrections of the System as will result in performance of the System in accordance with the Specifications. Buyer shall be given reasonable prior notice of the commencement of, and the reasonable opportunity to observe, all such tests.(b) The term ”Successful Completion“, when used in this Contract with respect to any test, means successful completion of such test as defined in the particular test procedure and all references to test denote the tests in Seller”s Acceptance Test Procedure.(c) Acceptance of the System (“Acceptance”) for purposes of Annex C shall be deemed to have occurred when all tests set forth in the Acceptance Test Procedure for the system at Buyer“s facility have been Successfully completed.(d) Seller represents and warrants that it will deliver to Buyer a complete, correct and valid system, capable of accomplishing the technical targets specified in Product Description and Specifications, as demonstrated by Successful Completion of the Acceptance testing of the System. Successful Completion shall be deemed as conclusive proof that the System is complete, correct and valid, and capable of accomplishing the technical targets set forth in the Specifications.

  9. Shipment in Place and Qualified Acceptance

  (a) In the event that the System or any part thereof is ready for shipment or installation in accordance with the dates set forth in Annex B and such shipment or installation is delayed more than _________ calendar days pursuant to Buyer“s request or because Buyer is unable to provide the necessary facilities, test equipment or resources for receipt or installation of the System, Seller may, at Seller”s option, notify Buyer that the System or any part thereof is being treated as though actually shipped, delivered and installed (“Shipped in Place”)。 In addition, Buyer shall reimburse Seller for all storage or other expenses which Seller incurs by reason of such delay.(b) __________ days following notice of Shipment in Place Seller shall be entitled to invoice Buyer in accordance with the payment terms set forth in Annex C hereto (i) for one hundred percent of the purchase price for commercial __________ system Shipped in Place, and (ii) with respect to Systems, the amount that would have been due had the System actually been shipped, with the balance to be invoiced upon Acceptance.(c) Qualified acceptance by Buyer of the System or any portion thereof(“Qualified Acceptance”) shall occur at any time, either before or after the scheduled shipment or installation dates set forth in Annex B,i) upon determination by Buyer, and written notification to Seller, that the System, is suitable to commence the operations for which Buyer intends to use it; or ii) that the System has commenced the operations for which Buyer intends to use it.(d) Qualified Acceptance shall have the same consequences as those set forth in Section 8 (b) above except that the amount due for Systems shall be the difference between the amount paid to date and _________ percent of the amount that would have been due upon Acceptance, with the balance to be invoiced upon Acceptance.(e) Neither Shipment in Place nor Qualified Acceptance shall relieve Seller from any of its responsibilities under this Contract, including Successful Completion of the Acceptance Tests and correction of defects or deficiencies in accordance with the terms and conditions hereof.[page]

  10. Taxes

  (a) Any and all taxes, levies, customs duties, sales, use, excise,value added and similar taxes to be levied on the Buyer in connection with the performance of this Contract for the sale of goods and repair and installation services, which are now existing or which may be hereinafter imposed by any People“s Republic of China governmental entity, shall be borne and paid by the Buyer.(b) All taxes in connection with the execution of this Contract imposed by any People”s Republic of China governmental entity on the Seller, and all taxes in connection with the execution of this Contract imposed by any ___________ governmental entity on the Buyer, in accordance with the tax laws which are now existing or which may be hereinafter imposed and the Agreement between the Government of ____________ and the Government of the People“s Republic of China for the Avoidance of Double Taxation and the Prevention of Fiscal Evasion with Respect to Taxes on Income, shall be borne and paid by the Seller and Buyer, respectively.(c) With regard to Section 10 (b) above, the Seller shall remit payment for such taxes to the relevant Chinese tax authorities through the Buyer within _______ working days after the Seller is in receipt of one(1) original certificate (invoice) for the taxes levied by the Chinese taxation authorities. The Buyer shall remit payment for such taxes to the relevant ___________ tax authorities through the Seller within _______ working days after the Buyer is in receipt of one (1) original certificate(invoice) for the taxes levied by the ___________ taxation authorities.(d) Any and all taxes, levies, customs duties, sales, use, excise,value added and similar taxes to be levied on the Seller in connection with the performance of this Contract for the sale of goods and repair and installation services, which are now existing or which may be hereinafter imposed by any _________ governmental entity, shall be borne and paid by the Seller.

  11. Operating Manuals and Other Materials/Training

  (a) Seller shall provide with each Commercial ________ system , one(1) User“s Guide.(b) Seller shall provide Buyer with three (3) copies of all operating manuals and installation instructions for the System, as well as maintenance manuals.(c) Prior to installation of the System, Seller shall provide Buyer”s employees with a training course in the use of the System , as well as in computer management techniques. Furthermore, these employees shall observe the Acceptance Test Procedure (ATP)。

  The training course and ATP described in this Article 11 (c) shall take place over a ________ day period at the Seller“s facilities in _____________, and all related expenses shall be borne by the Seller.(d) Following installation of the System, Seller or its designated service provider shall provide to Buyer”s employees a training course of up to ________ days in duration on-site at Buyer“s facility.

  12. System Warranties

  (a) Seller represents and warrants that it is the owner, or beneficial licensee, of all intellectual property rights herein licensed, leased or sold to Buyer, and that it has the right to license, lease or sell the same to Buyer. Seller warrants that the System and all equipment and related software furnished under this Contract (except for the Control Computer (s) and Control Computer (s) operating system software), shall be free from defects in material and workmanship for a period of one (1) year after date of Acceptance, except with respect to Commercial and Consumer _________ system, for which the period shall extend for one (1) year after date of shipment. During such period Seller shall repair or replace and reinstall at Buyer“s premises the System or any defective portion thereof without charge. Seller”s warranty does not cover the Control Computer or the Control Computer“s operating system software included in the System,but Seller shall assign any outstanding manufacturer”s warranty thereof to Buyer, to the extent assignable. If there is no such assigned warranty that extends one (1) year beyond Acceptance, Seller shall purchase, in lieu of warranty, for the benefit of Buyer and as part of the purchase price, an extended hardware and software maintenance contract for such Control Computer and operating system software which maintenance contract shall extend for a one (1) year period after acceptance. If any repair or replacement results from a defect not covered by the warranty or from causes other than normal usage and regular installation, Buyer shall pay Seller for all labor and materials (including travel expenses) provided by Seller in its attempt to remedy such deficiency.(b) The warranties set forth herein shall apply only to items which,after regular installation and under normal usage, are found to have been defective within the warranty period. Such warranties shall not apply to items that have been modified or altered without Seller“s written approval, or have been subjected to abuse, accident, negligence or improper application.(c) The warranties set forth herein are in lieu of all other warranties as to performance of the system, express or implied, including without limitation any implied warranties of merchantability or fitness for a particular purpose. Buyer”s sole and exclusive remedy for any breach by Seller of any of the warranties set forth herein shall be for Seller to make such repairs and/or replacements necessary to fulfill such warranties. in no event shall seller be liable for any loss of audio,video or data signals, interruption of business, or special, indirect or consequential damages of any kind or nature whatsoever. Seller shall not be responsible for delays in performing its obligations under this Article resulting from Buyer“s negligence or fault.[page]

  13. Nonwarranty Repairs and Spares Support

  (a) Until the earlier of (i) _______ years from the Acceptance of the System, or (ii) the date Buyer Ceases to Operate the System, Seller shall offer to provide repair services and/or spare parts for the System(“Support Period”), it being understood that Seller“s charges for spare parts and/or repairs not covered by warranty shall be at Seller”s then current time and material rates or spare parts prices and shall be invoiced as soon as work involved is completed. Seller shall have no obligation hereunder or otherwise to provide further spare parts or repair services to any person that has failed to pay promptly for any such spare parts or repairs.(b) Subsequent to the Support Period, Seller may discontinue offering spare parts and/or repair services for the System upon _________ months prior written notice to Buyer of Seller“s intended discontinuance,provided however, that Seller, at Seller”s option, either (i) grants to Buyer a nonexclusive license to make or have made for Buyer“s own use and not for sale any such System components (exclusive of the Control Computer and its operating system software) and furnishes Buyer all necessary documentation, specifications, drawings and other data, or (ii) allows Buyer the opportunity to purchase sufficient quantities of spare parts as Buyer deems necessary to maintain and support the System.(c) For purposes of this Contract, Buyer shall cease to operate the system if Buyer does not use the System furnished by Seller as part of the regular use on a regularly used satellite transponder to encode and decode signals.

  14. Extended Maintenance

  Prior to the expiration of the warranty period for the System set forth in this Contract, Seller and/or its designated service provider shall offer to Buyer the opportunity to enter into an extended maintenance contract with respect to the System (including the related Control Computer software but excluding the Control Computer hardware platform),renewable for successive and consecutive ________ year periods. Seller and Buyer shall discuss proposals for establishing a service center in ______,with the participation of Buyer, for the servicing of the system. Seller and Buyer shall also discuss proposals for future joint cooperation on other projects within China.

  15. System Licenses and Condition Precedent to Effectiveness

  (a) The Control Computer“s operating system software is provided to Buyer under the terms and conditions of a sublicense from the operating system licensor, as set forth in Annex F herein.(b) All Seller”s software required for operation of the System and the system is provided to Buyer under the license set forth in Annex E herein.(c) No technology transfer or assignment is granted under this Contract with respect to any products, or systems owned by Seller or any proprietary rights owned or sublicensed by Seller. No right to grant sublicenses is granted or is to be inferred or implied under this Contract.(d) Relevant PRC regulations may require Buyer to obtain the approval of the Ministry of Foreign Trade and Economic Cooperation (“MOFTEC”) as a precondition for the effectiveness of (a) the sublicense of the Control Computer“s operating system software to Buyer from the operating system licensor, as set forth in Annex F herein and (b) the license of Seller”s software which is required for operation of the System, to Buyer as set forth in Annex E herein (collectively, the “Annexes”)。 Within _________ working days of the execution of the Contract, Buyer and Seller will jointly confer with MOFTEC to determine whether MOFTEC“s approval is required for the effectiveness of the Annexes. If MOFTEC informs Buyer and Seller to the satisfaction of Buyer and Seller that the Annexes do not require its approval, the Contract shall become effective upon such communication. If, on the other hand, MOFTEC informs Seller and Buyer that the issuance of its approval is a precondition for the effectiveness of the Annexes, then this Contract shall become effective only upon the issuance of such approvals. If the foregoing conditions are not fulfilled within ________ days after the Contract execution date and Buyer and Seller do not agree in writing to waive such condition or to extend the time for its fulfilment,the Seller shall in such event be entitled to terminate the Contract forthwith and neither Party shall have any further obligations or liability towards the other Party under this Contract.

  16. System Security Requirements

  The parties shall agree to institute a System security plan for the System, which plan outlines security procedures that will be established and maintained in order to prevent theft or other compromise of the System during the shipment, storage, operation or any other phase of the parties“activities in connection with this Contract, including the warranty and post-warranty periods. Buyer agrees to adopt and comply with and/or cause its agents to adopt and comply with reasonable alternate or additional security requirements Seller may from time to time recommend.[page]

  17. Equipment Order Lead Times

  Delivery dates for the equipment which is the subject of this Contract appear in Annex B. Order lead times required for additional equipment are as follows: (sketch)

  Buyer will provide a rolling ________ month forecast of equipment desired for delivery. The first ________ months of this forecast are to be considered firm orders, subject to cancellation penalties set forth in Annex C.

  18. Mutual Representations

  Each party represents and warrants that:

  (a) It is duly organized and registered and in good standing in its state or country and has power and authority to enter into and perform this Contract and any other agreements and documents executed or delivered by it in connection herewith (collectively, with this Contract, “the Documents”)。

  (b) Its execution, delivery and performance of the Documents have been duly authorized by all necessary action.

  19. Confidentiality

  (a) Buyer agrees that any information or data such as Seller“ s drawings and software (including, without limitation, designs, reports,software documentation, manuals, models, and the like), revealed by Seller to Buyer and containing proprietary information marked or identified as”proprietary“ or ”confidential“ shall be maintained in confidence by Buyer with at least the same care and safeguards as are applied to Buyer”s own proprietary information, but in no event with less than reasonable care. Such information or data shall not be duplicated, disclosed to others, or used without the written permission of Seller. These obligations shall not apply to any information or data which is in or comes into the public domain without violation of this provision; or is received lawfully by Buyer from a third party; or is developed by Buyer independently and without benefit of the information or data received from Seller. Seller shall have no obligation to provide confidential or proprietary information.(b) Buyer“s obligations under this clause shall remain in effect for _______ years after this Contract is signed by the Seller and Buyer. All tangible forms of Seller”s proprietary information delivered by Seller to Buyer shall be and remain the property of Seller, and shall be returned to Seller upon Sel

文章评论

表情

共 0 条评论,查看全部
  • 这篇文章还没有收到评论,赶紧来抢沙发吧~